Pipeline Products For All Industries

01953 857 158

 

High abrasion resistant hose increases service life in harsh enviroments and in heavy duty applications. Suitable for high pressure lines conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air.
Eliminates the need for spring guards, nylon sleeving and any other hose protection.

Available in sizes 1/4" - 2" with Working Pressures up to 450 Bar

Airless paint spray systems – Applications requiring high chemical resistance to solvents
and aggressive fluids. Thermoplastic and Steel braided versions.

Available in sizes 3/16" - 1/2"  with working pressures up to 350 Bar

For aggressive chemicals transfer systems – Compressed air and gases – High or low temperature fluid or gas transfer.

Available in sizes 4.9mm - 26.1 ID  with working pressures up to 276 Bar

 

Thermoplastic hoses are available in a huge range of stylrs and sizes. Designed not only for the more common general applications, but also for specialist areas such as in marine and offshore duties, very high pressure, lightweight or anbti abrasion roles. Also there are types made for wide temperature applications such as fork lift cold store needs, or others for non conductive protection in high voltage electrical applications

Available in sizes 3/16" - 1" with working pressures up to 750 Bar and with either plastic or steel braid reinforcement.

 

The choice of actual coonectors has never been greater. Some decisions will depend upon the need to match existing thread styles in a system. At other times you will have the freedom to make your choices. These may be based on personal preference, or the need to ensure that the correct choice of style that meets the application need such as very high pressures.

Equally your choice may be made on the basis of the need for an imperial system or metric system.  Alternatives to these are also many. Japanese or French style variants may be chosen. Or the choice may also be made on the basis of combining flexible with rigid piping and the thread or connection system could dictate your best path.

Within each system are a wide range of actual fitting styles. From the straightforwrd male | female combinations to the selection of elbows to facilitate the best installation practice. Flanges with split flange connectors are often used for high pressure dynamic systems. These are usually dictated by such as the hydraulic pump connections as designed in by the manufactuer.

You may have the need for items such as a special connector for a high pressure washer application,or where close proximity to flat surfaces demand the use of a banjo with a through bolt.

WHAT IS IMPORTANT is to ensure you are using the correct fitting for the chosen hose along with the accompanying ferrule (swaging sleeve).

We can help you make those choices and lots more help and advice is available on how to incorporate hose assemblies ontto an application, for trouble free, long life working.

More about hose couplings

 

We also manufacture completed hose assemblies to your design and offer full testing facilities if required.

 

Hoses for  Medium to high pressure hydraulic lines. Suitable for conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air. With additional versions to cover specific needs such as compact installation style or pricked cover for gaseous  applications.

Available in sizes 3/16" - 2" with working pressures up to 500Bar

Medium to extremely high pressure hydraulic hose. Suitable for conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air.
All our Spiral hoses are fully branded Flame Resistant US MSHA approval N0.IC-188

Available in sizes 3/8" - 2" with working pressures up to 420 Bar including HP capabilities in the larger bore sizes.

High pressure hose. Suitable for water jetting cleaning equipment, hot and cold water systems with detergent fluids. Standard hose cover is black, but also available with a blue outer cover suitable for use in food factories and
areas that require a non marking cover. Also available are extremely high pressure hoses suitable for water jetting, blasting and cleaning equipment,
hot and cold water systems with detergent fluids

Available in sizes 1/4" - 1/" with working pressure up to 500 Bar

Hoses for medium to high pressure hydraulic lines. Suitable for conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air.
Including hoses pricked to allow gas permeation and venting to the atmosphere
. Also available are Air Brake hoses suitable for conveying petroleum based hydraulic fluids and lubricating oils, diesel fuels, crude fuel oil and anti-freeze. Widely used in automotive air brake systems. as well as Low pressure suction and delivery lines. Suitable for conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air.

Available in sizes 3/16" - 4" with working pressures up to 160 Bar